Why is Active Silver the Best?
With over 20 years’ experience manufacturing Colloidal Silver and over 50 years’ experience in Water Filtration. We are passionate about manufacturing the highest quality, safest and purest Colloidal Silver. Our technology is one of the best, creating the smallest particles of silver on the market.
We manufacture Active Silver using the purest silver (99.999%) and ultra-pure water, which is filtered via our 9-stage purification system, producing less than 1ppm of dissolved solids.
Active Silver is produced at a concentration of 10ppm (parts per million), with the silver particle size between 0.0005 to 0.005 microns. It’s the very small particle size of silver that we produce that makes it so effective. The smaller the particle size, the greater the surface area of silver for interaction, making it easier for the body/skin to absorb, process and eliminate. Once Colloidal Silver goes above 10ppm, the particle sizes get bigger and it becomes less effective.
It’s often thought that Colloidal Silver made at a higher concentration (20, 30ppm or more) will have more silver and therefore be more effective. This isn’t actually the case. The particle size is the most important factor, so if the parts per million goes over 10, it’s very difficult to continue to produce a consistent small particle size due to the way the electrolysis process works.
Is it Safe?
As Silver is found as a naturally occurring trace element it has been used for thousands of years as a natural way to support good health.
Active Silver’s Advanced Colloidal silver has a wide spectrum health benefits and no known side effects or reaction with other medications.
Make sure your Colloidal Silver is from a reputable manufacturer. Products with a high parts per million (ppm) concentration of silver (we would anything say over 15ppm) are not necessary and should be avoided.
Are other silver products with higher concentrations of silver more powerful?
Definitely not! Active Silver is produced at a concentration of 10ppm (parts per million), with the silver particle size between 0.0005 to 0.005 microns. It’s often thought that Colloidal Silver made at a higher concentration (20, 30ppm or more) will have more silver and therefore be more effective. This isn’t actually the case. The particle size is the most important factor here, so if the parts per million goes over 10, it’s very difficult to continue to produce a consistent small particle size due to the way the electrolysis process works.
It’s the very small particle size of silver that we produce that makes Active Silver so effective. The smaller the particle size, the greater the surface area of silver for interaction, making it easy for the body/skin to absorb, process and eliminate. Once Colloidal Silver goes above 10ppm, the particle sizes get bigger and it becomes less effective.
Taking Colloidal Silver at the wrong concentration and dosage is not advisable.
What is the history of Colloidal Silver
Silver has been used for thousands of years as a natural medicine. It is a natural mineral, which we use to get from the soil through our food, however due to extensive cultivation the natural minerals in our soil have been seriously depleted.
Often, people who live in areas with rich unspoilt soil, live healthier lives and have a stronger immune system. Roman soldiers were known to put silver coins in their mouths to protect them from illness, and silver coins were commonly added to vessels to keep water fresh and milk from spoiling, food was stored by the wealthy in silver containers to keep bacteria from growing. Silver utensils, plates and drinking cups have protected Kings, Emperors and the very wealthy for generations by the minute particles of silver that wore off and mixed with their food, therefore helping them fight diseases and live longer.
At the beginning of the 20th Century, colloidal silver was used extensively by medical practitioners as it proved to be enormously effective against bacteria. The use and research into colloidal silver declined after 1938 when antibiotics were introduced, however not even 100 years on and we are seeing some significant resistance to antibiotics. Since the 1970’s there has been a renewed and growing interest in Colloidal Silver.
Today, homoeopathic practitioners regularly use silver in their treatments. In the USA, silver is used in bone surgery and by 70% of burns centres. Japanese companies are using silver to remove cyanide and nitric oxide from the air. NASA use a silver water system in its space shuttles and many airlines companies use silver water filters to curtail waterborne diseases. Silver is also added to the water in many hospitals and public buildings in the UK to treat and prevent Legionellosis (Legionnaires disease) and other water borne bacteria and viruses.
How Should I store Active Silver?
We recommend you store Active Silver in a cool, dark place and out of reach of children.
Refrigeration is preferable, but freezing is not recommended. The products should not be exposed to direct sunlight.
Exposing the product to high temperatures for short periods (under 125 Fahrenheit) won’t affect the quality of the product, however storing the product in the car during summer is not advisable.
We would also recommend keeping the product away from electromagnetic energy (such as microwaves or electrical outlets).
Can I use Active Silver on my pets?
Yes! It’s very effective and a cheaper alternative to antibiotics in some cases. Please see our How to Use page for dosage recommendations for birds to horses!
Is the product certified or regulated?
There are no certifications or regulations required to manufacture or sell Colloidal Silver. However make sure you buy Colloidal Silver from a reputable manufacturer.
What colour should the Active Silver Solution be?
Active Silver is clear in colour or may have a very slight pale hue. Darker colours (yellow or amber) can be an indication of large particles of silver that reflect light, compounds (salts/proteins), oxidation or other impurities.
Clear colloidal silver indicates a smaller silver particle size which is easier for the body to absorb, process and eliminate.
Why is Active Silver in a glass bottle, rather than a plastic bottle?
We use glass to avoid any leaching from a plastic container. We are not prepared to compromised the quality and purity of our product and believe glass to be the better choice. Despite this, many Colloidal Silver manufacturers do continue to use plastic bottles as it is cheaper and reduces concerns associated with glass and breakage, shipping weights.
Can you use while pregnant?
We advise that you speak to your health care professional.
Lucy Roberts, MD of Active Silver takes a dose of Active Silver during pregnancy to help with specific ailments such as coughs, colds, cuts, burns etc.
What is Argyria, can I turn blue?
Active Silver definitely won’t make you turn blue, but there is a condition called Argyria, a permanent blue/grey discoloration of the skin. This condition is highly uncommon and can be caused by exposure to extreme quantities of silver from silver salts, silver compounds or inhaled silver powder/dust – so really it can only occur in the presence of extreme negligence and ingestion of Colloidal Silver made using impure silver or protein synthesis.
Protein synthesis silver solutions are typically made by blending silver powder and water and have very large silver particles yet lowest surface area of silver particles, which makes this solution the least bioavailable or able to be absorbed. These are the products known to be very dangerous and are known to cause Argyria, or Blue Man Syndrome. You can spot protein synthesized silver products because they foam heavily when shaken and the foam remains for quite a while. These products also typically have extremely high strengths, some as high as 20,000 parts per million (ppm). Please do not buy or use any product you suspect of being a protein synthesis. Hope this answer helps explain things.
There have also been very very few cases as a result of consuming homemade forms of Colloidal Silver or concentration of silver products that are 100ppm or higher. (100ppm is a very very high concentration which could be produced by someone if they are unclear on how the manufacturing process of Colloidal Silver works).
Silver is sensitive to light, so exposure of pale or colourless silver compounds to sunlight decomposes them to silver metal or sulfides, and these products can deposit as microscopic particles in the skin, in effect a dark pigment (causing Argyria).
The risk of serious harm from Silver is minimal.
It’s a bit like when assessing the safety of any chemical, you need to consider a number of things, the most important being concentration. Chlorine is a prime example. It’s an extremely acidic chemical with list of terrible side effects and dangers, yet it’s used to keep the world’s water supply clean and, when bound with sodium, exists in the form of salt on your dinner table. Most chemicals, including the components of the air we breathe, are toxic at the wrong concentration.
Active Silver has never been reported to cause a single case of Argyria and will never do so. We use an advanced manufacturing technique to produce our Colloidal Silver at a concentration of 10ppm with a very small particle size of silver. Our low concentration and high percentage of positively charged silver is what makes Active Silver more effective than others. The concentration of silver in our product is very low.
But any questions or concerns please contact us!
Argyria (Greek: ἄργυρος argyros silver + -ia) is a non-toxic, benign cosmetic condition caused by the ingestion of silver salts, silver compounds or silver dust which then react with ultra-violet light and results in a bluish coloration within the skin or sclera.
The most common cause is from excess silver salts accumulating in and around sudoriferous glands (perspiration glands). The skin serves as an alternative route of elimination of silver salts when the conjugation rate and/or elimination rate in the liver slows while dealing with large doses of silver or when the liver itself is compromised.
The potential for an argyric reaction to occur is directly related to the anion associated with the silver rather than the silver itself, thus a nitrate salt has a higher potential than a chloride and a chloride salt has a higher potential than a hydroxide.
Argyria may stem from inhalation exposure in work environments creating silver dust, from prescribed medicines using a silver mineral salt or an organic silver salt, or treatment of extensive burns with silver sulfadiazine. The most common event stems from homemade preparations, which attempt to make “colloidal silver” in water containing halides, especially chlorine. Silver chloride has a dull white color as it forms in water. Silver chloride is currently the most common salt associated with cases of argyria.
Individuals with pre-existing metal toxicity issues, liver issues and/or chronic nutritional insufficiencies are the most susceptible to potential argyric reactions from silver salts.
Argyria has mostly been found to be a permanent condition, although some cases reported of reversal have been reported using Q-switched and laser technologies, as well as chelation and other therapies.
Can I use Active Silver if I’m on antibiotics or any other medication?
We would always advise you speak to your doctor or health care practitioner. However, there are no ‘known’ side effects or reaction with other medications and one cannot overdose, however, it’s advised you stick to the recommended dose.
Colloidal Silver is known to actually help enhance the effectiveness of antibiotics and we’ve heard some antibiotics are now being coated in silver!
Will Active Silver destroy the good/friendly bacteria or probiotics I need (i.e flora) in my intestines?
Assuming the right concentration has been taken, the Colloidal Silver is absorbed rapidly into the upper gastrointestinal tract, leaving very little or none to interact with the beneficial ‘good’ bacteria in our intestines which are needed for our body to function effectively.